There are some home methods you can use to clean silver, however, they may or may not cause damage. These methods should not be used for silver that is irreplaceable! The first method you can use is toothpaste. You want to choose plain white toothpaste without whitening ingredients. Simply place a dab of toothpaste on a soft cloth and rub the silver gently. Then, you can rinse it and promptly dry it. Usually, this will remove tarnish spots.
How to Clean Silver
How to Clean Silver - Silver Dips available in the markets are generally harsh as they contain dangerous chemicals. You can easily make your own silver dip at home and give a bath to your silver wares.
If you have to wash your silver in bulk, take a big container or use sink, otherwise take a suitably sized container and fill it with hot water.
Add table salt or baking soda to the water and stir the water so that the salt (or soda) gets dissolved.
How to Clean Silver - This procedure to clean silver at home lends itself to the removal of tarnish from flatware or holloware. In an aluminum pot or a pot lined with aluminum foil, mix a dilute solution of equal parts of baking soda, salt, and liquid soap. A quarter cup of each to a gallon of water would be a typical mixture. Set the sterling into the pot, bring the mix to a boil and allow to stand for a few minutes. Oxides are transferred to the aluminum. Rinse in water and wash before using.
How to Clean Silver with soap - For quick cleaning of silver, such as removing makeup or light dirt, use a small amount of liquid detergent or soap to about a half cup of warm water. Using your cloth, wipe the solution the jewelry, rinse under clean warm water, and dry thoroughly. If using the toothbrush, scrub gently with the solution and rinse.
To remove tarnish or heavier dirt buildup, you will need to use special silver cleaner. Silver cleaners come in both a paste and a liquid form. Liquids are also known as silver dips.
How to Clean Silver - To remove spots from silver lay it for 4 hours in soapmakers’ lye, then throw on fine powdered gypsum, moisten the latter with vinegar to cause it to adhere, dry near the fire, and wipe off. Next rub the spot with dry bran. This not only causes it to disappear, but gives extraordinary gloss to the silver.
Methods of cleaning silver should be determined by the value placed on it, monetary or sentimental, and the design of the pattern. Silver with deeply “carved” patterns that are enhanced by an oxide or French gray finish should be hand polished with a high quality silver cream or polish.
Hand rubbing develops patina on silver which adds to its beauty. Ornamental silver pieces that have been lacquered may be washed in lukewarm water; hot water could remove the lacquer. Polishing silver while wearing rubber gloves promotes tarnish. Instead, choose plastic or cotton gloves.
How to Clean Silver - Removing Tarnish. This is actually the easy part. Simply apply Tarn-X with a soft cloth, wiping it on the clean piece of silver, and it will remove the tarnish; the mild “chemical” odor is actually from the sulfur coming off the silver. Don’t rub — rubbing is not necessary, and may be harmful to the silver. If the tarnish is extremely heavy, use a second application. Unlike silver polishes, Tarn-X is faster acting, less messy and less abrasive to silver. This is the key to preserving your silver — remove the tarnish, but limit the frequency of polishing silver, as all polishes remove some of the silver.
Well this article has covered some simple ways on how to clean silver to help you with your question to how to clean silver.
Participate in Recycling Questions and Forums
E-Books: Read Free EBooks online
Tags:clean silver how to clean silver ways to clean silver
