How to clean a fish tank
Remove all decorations from the tank, if likely. If you have live plants, or heavy rocks you can leave them in. Leave your fish in the tank as well.
Unless you are doing monthly cleaning you need to take all out of the tank. But How to clean a fish tank? This is a big question. Below is the method that will be helpful in providing you with the method of how to clean a fish tank.
Start the siphon and direct the water into a 5-gallon pail.
How to clean a fish tank process: Push the gravel vacuum through your gravel. Fish waste, surplus food, and other debris will be sucked out through the vacuum. You can take away up to a third of the water in the tank for onslaught, but you should put enough of the original siphoned water back into the tank so that you will not need to add more than 10 percent the volume of the tank in new prepared water.
The purpose of water changes is to remove nitrates from the tank, not to remove waste. Waste produces, indirectly, nitrates. You can have all the waste in there you want but still need to do lots of water changes to remove Nitrates. 10% a week is usually not enough to maintain a healthy environment for fish.
Rinse dry.
Algae are most easily detached from furnishings with white vinegar and a (dedicated) stiff brush. Be very sure to rinse thoroughly afterward.
It may be easiest to put back and situate the furnishings before all the water is replaced.
Put the siphoned water back into the tank as explain above and then add the prepared water.
Any turbidity (cloudiness) that remains will usually dispel in a few hours, leaving the water sparkling clear.
If you have a sand substrate, do not use the vacuum like a shovel. Use just the hose part of the siphon, not the plastic tube, holding it under an inch from the surface to suck up waste with not disturbing your sand.
How to clean a fish tank >
|
