| How to disable service set identifier
|
|
How to disable service set identifier
How to disable service set identifier? Generally when you buy a wireless router and plug it in, there is totally no security protection whatsoever. Most of them work right out of the box, but have no administrator or only the default password set, do not encrypt data, do not use a network key, and broadcast the SSID publicly. If you’ve found this article, you’re probably trying to figure out how to make your wireless network more secure.
How to disable service set identifier. One great way that I am going to talk about in this guide is disabling the SSID broadcast for your wireless router. The SSID is actually the name of the wireless network, which by default is usually the name of the networking company, such as Netgear, LinkSys, or D-Link. By turning off the broadcast, the name of the network will not show up on the Windows or Mac list of available networks. This method of security by no means will prevent a hacker from getting into your network, but it’s still better than doing nothing at all.
In fact, this is really only helpful for those people who live in apartments, condos, dorms, etc where other people live very close by and can pick up your signal and use your bandwidth to browse the net. A good hacker has many tools that can detect wireless networks even if the SSID broadcast is disabled!
Unluckily, each brand of router has the disable SSID under different menus! I’ll go ahead and try to give directions for each of the major brands since that’ll take care of 99% of the wireless users. In order to do this, you’ll have to logon to your router to configure it. You can get the IP address of the router by going to Start, choosing Run, typing cmd, clicking OK and then typing in ipconfig at the command prompt.
Now you have learned that How to disable service set identifier?
How to disable service set identifier >
|
|
